Safe for use in prestressed and reinforced concrete
Hot weather concreting where rapid slump loss occurs
Confirms to IS: 9103:1999 and ASTM - C 494M - 99a, 1999 Type G
Increased work ability with reduced water
Flowing yet very cohesive
Easy to pump
High early strength due to high water reduction
Chloride free
Add POLYTANCRETE SPR to pre-wetted concrete mix at a rate of 0.8 to 1.2% by weight of binder. However actual site trials have to be carried out to minimize the optimum dose for the intended application. Mix the measured quantity of POLYTANCRETE SPR with part of gauging water and then add to the mix.
Reduces segregation & water requirements In hardened concrete
Increases strength
Improves finished appearance
Reduces cracking & permeability
Conforms to ASTM C 494 Type F & IS 9103 for chemical admixture
Reduce water cement ratio while maintaining workability
Increases strength of the concrete/ mortar by reducing water content
It is soluble. Add it to the gauging water. It is desirable to have trial mixes to assess the actual effect of the ingredients under field conditions. Always use measured quantities.
POLYTANCRETE HP : High Range Water Reducing PCE Based Concrete Admixture
Hyperplasticizer in the production of free flowing concrete for all precast and RMC concrete slabs and foundations, walls, columns and piers, high strength concretes, etc.
POLYTANCRETE SF : Superplasticiser for self compacting concrete (SCC)
Safe for use in pre-stressed and reinforced concrete
Hot weather concreting where rapid slump loss occurs
High performance concrete
Produces self compacting concrete
Flowing yet very cohesive concrete is produced without bleeding an segregation. Can be pumped easily
High early strength due to high water reduction up to 30-40%
Improves impermeability & durability
Add POLYTANCRETE SF to pre-wetted concrete mix, at a rate of 0.4 to 0.8 % by wt. of cementitious material. Mix the measured quantity of POLYTANCRETE SF with the remaining 10-20 % part of gauging water and then add it to the mix.